{category.name}

Product Catalog

  • Manufacturer: Mastercraft

Carpet dryer

  • Manufacturer: Nobles

20" floor polisher

  • Manufacturer: Hilti Group
  • Model Number: TE 16

Optimised design to withstand the toughest conditions

  • Manufacturer: Hilti Group
  • Model Number: TE1000

Hitil TE1000 Electric Jackhammer

  • Manufacturer: Bobcat
  • Model Number: G-325

Bobcat Excavator G325.

  • Manufacturer: Ruko

Street Saw with 14" blade-water hook up. Blade seperate. 9hp motor.

  • Manufacturer: Ruko

Stow Power Trowel

  • Manufacturer: Hilti Group

Hilti Hammer Drill 16C

  • Manufacturer: Stone Construction, Inc.
  • Model Number: 2051

WP3100 Wolf Pac Ride-On Asphalt Roller with a 35.4" working width is ideal for driveways, parking lots and other small paving jobs. The Wolf Pac 3100 roller’s combination of rear drum ballasting and internal front drum vibration allows the operator to match the machine to the application. Center point articulation, a short wheelbase and high curb and minimum wall clearance on both sides make this roller incredibly effective in confined areas.

  • Manufacturer: Stone Construction, Inc.
  • Model Number: 1764

655PM Mortar Mixer has a 6 cu.ft. batch capacity, 1 1/2 - 2 bag capacity. Use this tow-behind mixer to mix mortar, plaster, stucco, color blending and fireproofing - every mixing
need.

  • Manufacturer: Clarke Floor Maintenance
  • Model Number: 302004230

8 Gallon wet/dry tank vacuum with accessory plug with auto start/stop

  • Manufacturer: Clarke Floor Maintenance
  • Model Number: 07125A

7" edge sander. Complete with carrying case and paper changing tool. Aggressive, professional results

  • Manufacturer: Senco Fasteners & Tools
  • Model Number: PC1131

2 1/2 HP 4.3 Gal Oil Twin Tank Compressor

  • Manufacturer: Marshalltown Tools
  • Model Number: MB48

This bull float is made from lightweight magnesium, and is used to level and smooth the surface prior to finishing. Magnesium floats provide a smoother finish than wood floats

  • Manufacturer: Makita Power Tools
  • Model Number: MAC5200

This air compressor is powerful enough to run two framing nailers. The cast iron pump with Big Bore™ cylinder and piston is engineered to provide faster recovery time for improved performance. The 2" Brad Nailer has a cast and machined nose piece for precise contact. The easy to use "tool-less" depth adjustment dial allows for a wide variety of finish applications. It's multi-directional exhaust port rotates 360º to direct exhaust air away from the user

  • Manufacturer: Cherry Hill Mfg.
  • Model Number: U Sand Pro

Using four-pad, random orbit technology, the U-Sand Pro sander makes floor sanding easy and worry-free

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 705816
  • Model Number: 470

The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring and includes a shoe pad for nailing ½” wood flooring Designed to accept 1-1/ 2 or 2” Flooring nails T OR L Flooring nails. You choose the Porta-Nail flooring fastener T or L based on the style you are now using or style that is readily available to you. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go. Porta-Nails are also available in stainless steel for ACQ treated materials. Cat # 47090 Wide Profile Shoe is available to position Portamatic TL in front of tongue to provide balance and protecti

  • Manufacturer: Mi-T-M
  • SKU: 112148
  • Model Number: CA-2703-0MHB

2700 PSI @ 2.4 GPM Direct Drive Aluminum Frame Pressure Washer, 196cc Honda GX200 OHV With Low Oil Shut Down

  • Manufacturer: Milwaukee Elec Tool
  • SKU: 698472
  • Model Number: 6390-21

Tilt-Lok 7-1/4" Circular Saw with Case

  • Manufacturer: L.B. White Co., Inc.
  • Model Number: Torchman 500 Delux-Bulk

L.B. White torches offer the variety and quality needed for the numerous year round uses of this versitile tool. Thawing pipes or sand, burning brush, cleaning asphalt machines, and roofing are just a few of the many tasks accomplished with the concentrated heat produced by L.B. White torches

  • Manufacturer: L.B. White Co., Inc.
  • Model Number: Tradesman K400

When using gas is not convenient, or a self-contained fuel source is desired, Tradesman kerosene heaters provide instant, efficient directional heat. A dependable dual-prong electronic spark ignition, heavy duty enclosed motor, and brass fuel fittings are just a few of the features that provide the long life and trouble free operation you expect from L.B. White

  • Manufacturer: L.B. White Co., Inc.
  • Model Number: Tradesman 400

L.B. White Tradesman gas-fired heaters are engineered and manufactured in the USA to deliver reliable, directional forced air heat for temporary heating needs. They feature a unique 3-trial ignition system and the industry's heaviest gauge combustion chamber and burner plate

  • Manufacturer: Jet
  • SKU: 724565
  • Model Number: 140080TV

JET 27" x 48" Forks, 4500-LB Capacity PALLET TRUCK -- High-quality welded steel construction with a durable powder coat finish 2-1/2" low profile design for smaller size pallet openings. Easy-to-use with single hand operation, fingertip controls and 180 degree turning radius. Extra wide poly-over-steel steer wheels provide a smooth, quiet ride with added traction and stability. Wheel bearings are double sealed and lifetime lubricated. When purchased through the True Value warehouse, this pallet truck is assembled. Otherwise, some assembly is required. See True Value # 724565

  • Manufacturer: Jet
  • Model Number: 454227

JET 2-1/4-Ton SHORT SERVICE JACK w/ Quick-Lift Pump -- Features automatic safety overload bypass system. Full swivel, ball bearing rear casters are positioned for best load distribution and optimal maneuvering . "Quick Lift" pump feature with no load. Complies with ANSI/ASME PALD-10 standards